Electrostatic protection of 开云·kaiyun官方网站A components

ElectrostatIC protection of 开云·kaiyun官方网站A components
Employees who assemble electronic products in the factory manage the 开云·kaiyun官方网站 assembly process to prevent electrostatic damage and improve the quality of electronic products I开云·kaiyun官方网站er, Shenzhen 开云·kaiyun官方网站 assembly technology engineer, will introduce the following anti-static requirements for you
Electrostatic protection
1. Electrostatic safety workbench in 开云·kaiyun官方网站 assembly workshop: composed of workbench, anti-static workbench pad, wrist strap connector and ground wire.
2. More than two wrist strap connectors shall be instalLED on the anti-static table of 开云·kaiyun官方网站 assembly workshop, one for 开云·kaiyun官方网站 assembly technology operators and one for 开云·kaiyun官方网站 assembly technology personnel or 开云·kaiyun官方网站 assembly inspectors.
3. Plastic boxes, rubber, cardboard, glass and other impurities that are easy to generate static electricity shall not be stacked on the anti-static safety workbench. Drawings and data shall be put in anti-static archive bag.
4. 开云·kaiyun官方网站 assembly workshop anti-static wrist strap. Operators who directly contact with electrostatic sensitive parts must wear anti-static wrist strap, which shall be in good contact with human skin.
5. The anti-static containers in the 开云·kaiyun官方网站 assembly process workshop, the part fixing bags on the 开云·kaiyun官方网站A processing and production site, the turnover box and the 开云·kaiyun官方网站 board mounting and unloading rack shall have anti-static functions. It is prohibited to use metal and ordinary containers, and all containers must be grounded.
6. Anti static clothing for 开云·kaiyun官方网站 assembly process workshop. Operators entering the electrostatic work area and personnel contacting SMD parts must wear anti-static clothing, especially in a dry environment with relative humidity lower than 50% (such as autumn and winter). All anti-static clothing fabrics in 开云·kaiyun官方网站 assembly workshop must comply with relevant national standards.

7. All personnel entering the working area of 开云·kaiyun官方网站 assembly process workshop of 开云·kaiyun官方网站 assembly board manufacturer must wear anti-static work shoes and anti-static caps. People wearing ordinary shoes should use conductive shoelaces, anti-static shoelaces or heel laces.
8. The transmission belt and transmission shaft used on the production line of 开云·kaiyun官方网站 assembly process workshop shall be equipped with anti-static grounding brush and grounding rod.
9. Ionic wind electrostatic eliminator can be used on the surface of conveyor belt.
10. The assembly fixtures, test fixtures, welding tools and various instruments used on the 开云·kaiyun官方网站 processing site in the 开云·kaiyun官方网站 assembly workshop shall be equipped with good grounding wires.
11. An anti-static test bench is installed at the entrance of the 开云·kaiyun官方网站 processing site in the 开云·kaiyun官方网站 assembly workshop. Everyone who enters the 开云·kaiyun官方网站 production site should accept the anti-static test and must pass the test before entering the 开云·kaiyun官方网站 assembly technology workshop.
These are the basic anti-static equipment managed by 开云·kaiyun官方网站A processing and assembly electronics factory. After several years of development, many 开云·kaiyun官方网站 assembly workshops have added several sets on this basis.
12. The 开云·kaiyun官方网站 assembly process workshop of the 开云·kaiyun官方网站 assembly board manufacturer needs to install real-time monitoring equipment to monitor the occurrence of static electricity on the human body, equipment and pads at any time, so as to find problems and solve them at the first time.
13. Install anti-static monitoring system 开云·kaiyun官方网站 assembly technology to visualize and analyze the workshop where static electricity occurs, so as to manage the 开云·kaiyun官方网站 assembly technology workshop for electrostatic protection in 开云·kaiyun官方网站A processing